olzlevel.blogg.se - Ami flash utility

The new BIOS image is now flashed to the FWH chip.

If it does not reboot automatically after a few seconds, press the reset button.

After the updating process, the "rebooting." is written on the screen.

The video screen will show the flash recovery progress and messages. The process will now load the AMIBOOT.ROM from the USB drive and proceed to POST.

Press the CTRL-HOME key combination as soon as the system powers up.

Shut down is necessary since a system reset is not sufficient.

Shut down the system and insert the USB flash drive.

Ask the Toradex Support Team for the newest BIOS image or Copy the BIOS image to the root of a USB flash drive.

If BIOS version J007 is loaded, the ID is 0ABQJ007, whereas BIOS version J009 shows 0ABQJ009.

The "System Overview" screen shows the AMIBIOS ID. Enter the BIOS Setup Utility by pressing the DEL button during the booting. Check the current version of the BIOS.The AFUWIN or AFUDOS uses the flash routine of the old BIOS image (the image that is currently running on the system).

The BIOS Recovery Utility uses the flash routine from the new BIOS image (image that will be flashed) which should not fail. Please do not use the AFUWIN or AFUDOS program for updating systems with BIOS versions J007, J907 or J009, since these BIOS versions contain a flash routine that can fail during the flashing process. This BIOS update procedure uses the BIOS Recovery Utility and is only valid for updating Woodpecker and Robin Modules from the AMI BIOS versions J007,J907 or J009 to the version J0011.